Intel 480T, User Manual

Page: 263 / 367

C H A P T E R 1 4 Access Policies
261
create access-list icmp destination
[<dest_ipaddress>/<mask> | any] source
[<src_ipaddress>/<source_mask> | any] type
<icmp_type> code <icmp_code> [permit |
deny] {<portlist>} Creates a named IP access list. The access list is
applied to all ingress packets. Options include:
•
<name>
— Specifies the access list name.
The access list name can be between 1 and 16
characters.
•
icmp
— Specifies an ICMP access list.
•
destination
— Specifies an IP destination
address and subnet mask. A mask length of
32 indicates a host entry.
•
source
— Specifies an IP source address and
subnet mask.
•
type
— Specifies the ICMP_TYPE number.
The ICMP type is a number from 0 to 255.
•
code
— Specifies the ICMP_CODE number.
The ICMP code is a number from 0 to 255.
•
permit
— Specifies the packets that match
the access list description are permitted to be
forward by this switch. An optional QoS
profile can be assigned to the access list, so
that the switch can prioritize packets
accordingly.
•
deny
— Specifies the packets that match the
access list description are filtered (dropped)
by the switch.
delete access-list <name> Deletes an access list.
disable access-list <name> counter Disables the collection of access-list statistics.
enable access-list <name> counter Enables the collection of access-list statistics.
The default setting is enabled.
show access-list {<name> | ports <portlist>} Displays access-list information.
show access-list-fdb Displays the hardware access control list
mapping.
Table 68: Access List Configuration Commands (continued)
Command Description