Designed and manufactured by:
Integrated Controls, Inc.
2851 21st Street
San Francisco, CA 94110
Tel: 415-647-0480 Fax: 415-647-3003
email: [email protected]
website: http://www.dmxit.com
DMX-512 CONNECTIONS
Use a standard 5 pin XLR, DMX data cable to
connect the
dmx-IT
to your DMX receivers.
(
Pins 1-3 are used, 4 & 5 are not connected to the
dmx-IT
)
Note:
dmx-IT
products comply with the DMX512
standard as defined by the USITT specification and
use a 5 pin XLR for interface connection and data
transmission to DMX receivers. The wire type for
DMX512 cable must be data cable designed for
EIA485. This cable is low capacitance, twisted pair,
shielded, and designed for high speed data. There
are many brands and types that will work reliably.
Standard pre-built cables can be purchased from
any theatrical lighting supplier. Conversion to 3 pin
XLR and use of microphone cable is known to be
problematic and not recommended.
CHANNEL SETTING RANGE
Valid starting addresses for the
DMX-IT
512
are
from 001 to 512. Entering a starting address setting
of 000 or 513 to 999, will be ignored if a valid address
has previously been set, or will result in a starting
address of channel 1 if no address has previously
been set. Setting the starting address to a channel
number from 502 to 512 will result in the sliders
controlling the channels from the starting address
up to channel 512. The remaining sliders will be
ignored. For example, with the starting address set
to 512, the channel 1 slider will control channel 512
and sliders 2-12 will be ignored.
SPECIFICATIONS
Size: 7.6" L, 1.3" H(front), 1.75" H(rear), 3.75" W
(19.3cm L, 3.3cm H(front), 4.4cm H(rear), 9.5cm W)
Net Weight: 1.5 lbs. (0.68kg)
Power requirements: 4 AA alkaline batteries (not included)
and/or a 9-12V 100mA AC adapter (included), with a
standard 2.1mm x 5.5mm barrel connector.
Adapter polarity may be either center positive or center
negative.
dmx-IT
data control timing accuracy meets or exceeds
USITT standards and provides highly stable outputs with
no jitter or bobble headed values.
DMX-IT 512
Palm-Top Lighting Console
USER MANUAL
Integrated Controls, Inc.
DMX-IT Service Policy Available on website
Integrated Controls, Inc.
Dealer
