LED RECESSED LIGHTS 2015B
INSTALLATION INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should always
be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. To avoid the possibility of electrical shock, turn off power supply before
installation or servicing. lnstallation and servicing should be performed
by qualified personnel.
2. Product must be installed in accordance with your local electrical code.
lf you are not familiar with these codes and requirements, consult a
qualified electrician.
100-240V/277V AC, 50/60Hz, Suitable for Wet Locations (IP66), Class 1
*This product must be grounding
3. Do not change the structure or any commponents of the fixture to
ensure safety.
SAVE THIS INSTRUCTIONS FOR FUTURE REFERENCE
TO INSTALL:
Power
40W /50W
80W /lOOW
120W /150W
160W /200W
Modules
1
2
3
4
Dimension
231 x316 x120 mm /9.1 x12.4 x4.7"
304 x316 x120 mm/12.0 xl2.4 x4.7"
377 x316 x120 mm/14.8 x12.4 x4.7"
450 x316 x120 mm/17.7 xl2.4 x4.7"
� >•�"'• �'"� Th,a,=
1
10- 25 mm /0.4- 1.0 inches
Weight
2.4 kg /5.3 Ibs
3.6 kg /8.0 Ibs
4.4 kg /9.7 Ibs
5.4 kg /11.9 Ibs
Hole Size: 202 x285 mm
8.0 xll.2 inches
Hole Size: 275 x28S mm
10.8 xll.2 inches
Hole Size: 348 x285 mm
13. 7 xll.2 inches
Hole Size: 421 x285 mm
16.6 xll.2 inches
0
Ceiling Panel
11,_
Po
::
r
��::
I
:
Cord
�-
-
��----,
Il
;.b)
r
luminaire Main Body
f.)
0
Ceiling Panel
Remove Ceiling Securing
Fittings on this side
3-3
Allen Wrench: 6mm (5/32")
, ,. - � ... , Ceiling Securing Fittings
: filjJ
,,'.
Notice the INSTALLATION DIRECTION
'., '
''
..
_ /
Allen Wrench: 6mm (5/32")
Ceiling Securing Fittings,,,
,,
qi'\
0
Notice the INSTALLATION DIRECTION
\.ltt
b!),,.
.. _ .....
STANDARD MOUNTING
STEP 1:
Open the mounting hole on the Ceiling Panel.
(See
Figure 1
for opening size)
STEP 2:
Remove TW0{2) Ceiling Securing Fittings of
one side, bring the side of Luminaire Frame
with Ceiling Securing Fittings into Ceiling Panel.
See
Figure 3-1.
Bring entire Luminaire Frame into Ceiling Panel,
Clamp the Ceiling Panel by Ceiling Securing
Fittings and tighten by 6mm {5/32") Allen
Wrench. See
Figure 3-2.
Mount the removed Ceiling Securing Fittings
back to Luminaire Frame, notice that the bath
sides are opposited. Clamp and tighten by
6mm {5/32") Allen Wrench. See
Figure 3-3.
STEP 3:
Connect the
Power Cord
to the supply wiring
per
"Electrical Connections"
section for
completing electrical connections .
