USER MANUAL - LBU-ONL 1.5K/2.25K/3K/4.5K
VER.2211.17-One (ENG)
20
10.
SOFTWARE
Our monitoring software allows user to manage Inverter and monitoring of all its features.
Main software features are:
•
Configuring Inverter parameters,
•
Automatic shutdown for protected PCs (OS and files) when long blackouts force Inverter to power-off
•
Scheduled battery tests, shutdown, and start-up
•
Easy interface for monitoring Inverter and Main service.
CD software is usually included inside the box. For some models, software can be downloaded from our website. Software manual can
be downloaded from our website also.
11.
BATTERIES: CARE AND REPLACEMENT
To have a longer Battery life, it is recommended to apply a deep discharge to batteries every 3 months. It is also recommendable to
operate Inverter with a room temperature below 25ºC. Operating Inverter with higher room temperatures will short dramatically battery
life.
IMPORTANT: RECHARGING PLAN FOR LONG STORAGE
If Inverter and batteries are going to be stored for long time, it is mandatory to recharge batteries periodically. If batteries are not
recharged according to this plan, batteries will get permanent damage. This kind of damage is not covered by warranty.
Recharging plan is conditioned to storage temperature:
STORAGE TEMPERATURE: - 25ºC to + 30ºC : RECHARGE EVERY 4 MONTHS / RECHARGE DURING 6 HOURS
STORAGE TEMPERATURE: + 30ºC to + 45ºC : RECHARGE EVERY 2 MONTHS / RECHARGE DURING 6 HOURS
BATTERY REPLACEMENT
Batteries must be replaced by technical personnel only.
For replacement, Inverter must be turned off and disconnected from AC source.
Batteries must be replaced by new batteries with same specifications and technology.
WARNING - BATTERIES:
Batteries must be disposed according to your country regulations.
Do not dispose batteries in fire as they might explode
Do not try to open batteries, there are dangerous liquids inside.
