16
Step3: Connect the TV & AV Components
1. Connect the TV
To ARC TV
For a TV that supports the ARC (Audio Return Channel)
(*1) feature, use an HDMI cable and connect according to
illustration "a". Choose an HDMI IN jack on the TV that
supports ARC when connecting.
To Non-ARC TV
For a TV that does not support the ARC (Audio Return
Channel) feature (*1), connect both the HDMI cable in
illustration "a" and the digital optical cable in "b". If the TV
doesn't have a DIGITAL OPTICAL OUT jack, use an analog
audio cable and connect the TV's ANALOG AUDIO OUT
jack to the AUDIO IN TV jack on this unit.
0
Connection with a digital optical cable is not necessary if
you will watch TV through a device such as a cable set-
top box (that is, not use a tuner built into the TV) that you
have connected to the INPUT jack on this unit.
(*1) The ARC feature: This feature transfers TV audio signals via
HDMI cable so that you can play the audio from the TV through
this unit. Connection to an ARC compatible TV is complete with
one HDMI cable. Refer to the instruction manual for your TV to
see if it supports ARC.
(*2) Another TV or projector can be connected to the HDMI OUT
SUB jack. Press Q (P6) on the remote control and use "Other" -
"HDMI Out" to switch between MAIN and SUB. Note that this
jack does not support ARC.
> Install
> Playback
Troubleshooting | Supplementary Information, etc.
a
b
*2
a
HDMI Cable,
b
Digital Optical Cable
Setup
0
Settings are required to use the ARC function.
Select "Yes" in "5. Audio Return Channel" (P26) in
the Initial Setup.
0
Refer to the instruction manual for the TV for TV
connections and instructions regarding settings
for CEC features and audio output.
