background image

Contents

Thank you for purchasing the Integra 2 Channel
Amplifier.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new 2 Channel Amplifier. Please
retain this manual for future reference.

ADM-2.1

2 Channel Amplifier

Instruction Manual

Before using

Important Safeguards ....................................... 2

Features ............................................................. 3

Supplied accessory ........................................... 3

Precautions ........................................................ 3

Facilities and connections

Rear panel facilities and connections ............... 4

Connection diagram .......................................... 5

Front panel facilities and connections .............. 6

Operations ......................................................... 7

Appendix

Troubleshooting guide ...................................... 7

Specifications ................................... Back cover

#US_ADM-2.1_01.p65

8/25/00, 6:22 PM

1

Summary of Contents for ADM-2.1









Reviews: