36
-
Select the desired function by pressing ‘Enter’ button on the monitor or the
button of the
remote control. Press the button to make your selection.
- If ON is selected, the channels are scanned automatically in sequence of HD 1, HD 2, CAM 1,
CAM 2, CAM 3, CAM 4 and once that the scanning is completed, HD 1 is displayed in full screen
mode, whenever the monitor turns on or returns to live screen from the OSD menu.
- If OFF (Default) is selected, the last channel and the view mode is saved from the last time of
operation and it is displayed after booting is completed when the monitor turns on again.
4. Distance Grid
: Selection between ON and OFF
- Locate the cursor
at DISTANCE by pressing ‘Screen (Up)’ & ‘Channel (Down)’ buttons of the
monitor or Cursor Control (Direction) buttons on the remote control.
-
Select the desired function by pressing ‘Enter’ button of the monitor or the
button of the
remote control. Press the button to make your selection.
- If ON (Default) is selected, the Rear Distance Grid Image overlay is displayed over the Rear
Camera video if Trigger 1 is activated when connected to the reverse voltage of vehicle.
- If OFF is selected, just the video from the Rear Camera without grid overlay is displayed if
Trigger 1 is activated when connected to the reverse voltage of vehicle.
- This DISTANCE GRID function is available in the channel (camera) associated with Trigger 1
only. (FUNCTION > SETUP > CAMERA > TRIGGER LATCH TIME)
5. Tach
: Selection between ON and OFF
- The TACH function is used to display video from the camera view associated with the Tach
Trigger (connected to the tachometer pulse of the vehicle) on engine startup whenever the
CVMHDVR706 DVR monitor is turned on or off (Recommended use
– Undercarriage of vehicle
camera view). If the vehicle RPM reaches the Tach Level programmed, the TACH TRIGGER
function is terminated and the monitor returns to the previous mode. Therefore, the user should
turn on the monitor if its power mode was off previously. If the vehicle speed is lower than the