35
IV.
Function
To view the top OSD menu (Function) on the screen, press the
‘Menu’ button on the monitor or the
remote control.
1. Language
: Initial language available is English only. Others will be offered as necessary
through firmware update. Please contact INTEC with requests.
- Locate the cursor at LANGUAGE by pressing
‘Screen (Up)’ & ‘Channel (Down)’ buttons of the
monitor or Cursor Control (Direction) buttons on the remote control.
- Select the desired Language by pressing the
‘Enter’ button of the monitor or the
button of the
remote control.
Press ‘Enter’ button repeatedly until desired language is selected.
2. Dimmer
: Selection between AUTO and OFF
- The automatic brightness control of the LCD panel is regulated according to the ambient light
condition around the monitor if AUTO (Default) is selected. OFF requires manual adjustment.
-
Locate the cursor at DIMMER by pressing ‘Screen (Up)’ & ‘Channel (Down)’ buttons of the
monitor or Cursor Control (Direction) buttons on the remote control.
- Select the desired function by pressing
‘Enter’ button on the monitor or the
button of the
remote control. Press the button to make your selection.
3. System Scan
: Selection between ON and OFF
- Locate the cursor at SYSTEM
SCAN by pressing ‘Screen (Up)’ & ‘Channel (Down)’ buttons of the
monitor or Cursor Control (Direction) buttons on the remote control.