18
2.5
Installing the mSD and SSD Memory
Warning:
Remove power from the monitor or disconnect the vehicle battery prior to removing the
SD / SSD cover.
Installing the Micro SD card: Remove the
tamper proof screw and slide the lock
switch down, remove the SSD Case.
Insert the Micro SD card into the card slot
and re-install the SSD Case.
Installing the SSD board into the
removable SSD case: Following steps 1
and 2 remove the SSD Case. Open the
case by removing the 4 Philips screws and
insert the SSD card into the card slot.
Reassemble the SSD case and reinstall it
in the monitor.
Figure 5 Installing the mSD and SSD Memory