12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.IN
TEC
| relevantsolutions.com/inteccontrols
Specifications subject to change without notice. | USA 160811 | Page 23 of 34
MGC2 – UserManual
PolyGard
®
is a registered trademark of MSR-Electronic GmbH
4.7.5 Error Status
Symbol
Description
Setting Status
Function
OFF
Error status
OFF
OFF = Faults are not stored
ON = Faults are stored
Release of the fault recording for all active sensor points on the USB device in the common CSV file for alarms and
faults.
Internal structure of the file
(The headlines are not written in the file!)
Current time
Source
Error date + time Error type
10_22_28
SP 24
03_30 10_20
+ SP 24 error
13_48_28
SP 24
03_30 13_46
- SP 24 error
The first column gives the current time, the second one the error source. The third column indicates the time and date
when the error has occurred.
In the fourth column there is the type of error.
+ = Error occurred.
- = Error acknowledged.
Every internal restart of the system (system reset) is also documented in the current day file.
Frequent reboots (several times per day) may point to a technical problem. Please consult the installer as soon as
possible.
Info
Date
Time
MGC2 Reset
30_03_12
13_38_19
