INSYS WLAN 2.1, Manual

Page: 22 / 98

Mounting INSYS WLAN serial 2.1
8 Mounting
This section describes how to mount the INSYS WLAN serial 2.1 to a DIN rail, con-
nect the power supply and uninstall it again.
Caution!
Moisture and liquids from the environment may seep into the
interior of the INSYS WLAN serial 2.1!
Fire hazard and damage of the product.
The INSYS WLAN serial 2.1 must not be used in wet or damp
environments, or in the direct vicinity of water. Install the INSYS
WLAN serial 2.1 at a dry location, protected from water spray.
Disconnect the power supply before you perform any work on a
INSYS WLAN serial 2.1 which may have been in contact with
moisture.
Caution!
The device could be destroyed if the wrong power supply is
used!
If the INSYS WLAN serial 2.1 is operated with a power supply
that supplies a voltage exceeding the permissible operating
voltage of the INSYS WLAN serial 2.1, the device will be de-
stroyed.
Make sure that you use the suitable power supply. Refer to the
section Technical Data for the proper voltage range of the IN-
SYS WLAN serial 2.1.
22