manualshive.com logo in svg

INSYS StyleNote M74*S series, User Manual

Share
Download
INSYS StyleNote M74*S series User Manual Download Page 220

Windows XP Information

E - 20 Power Schemes

E

Power Schemes

You can set your computer to conserve power through individual components by
means of 

Power Schemes

. You can also adjust the settings for each scheme to set

the monitor to turn off after a specified time, and the computer's hard disk motor to
turn off if the hard disk drive has not been accessed for a specified period of time (if
the system reads or writes data, the hard disk motor will be turned back on). The
schemes may also be set to set a specified time for the system to enter 

Stand by

 or

Hibernate

 modes (see 

“System Power Options” on page E - 22

).

Resuming 

Operation

Press a key on the key-
board, or move the
mouse/TouchPad to re-
sume from Monitor or
Hard Disk Stand by.

Figure E - 12

Power Schemes

3.75G/HSPA 

Modules & System 

Wake Up

Note that the 3.75G mod-
ules 

DO NOT

 support

system wake up on
3.75G/HSPA modem ac-
tivity.

Summary of Contents for StyleNote M74*S series

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands