INSYS GSM 4.3 easy, Add-On Manual

Page: 19 / 26

INSYS GSM 4.3 easy Functional Description
number „0123456789“
SECRET,MONITOR PUMP,CN: 0123456789
In this case, the alias „PUMP“ is linked to an object „analogue byte register“, „analogue
word register“ or „analogue double word register“.
5.3.3 Setting an Object Instance
Command:
SET < Objectshortname><Instance>=<Value>[,CN:[ Callback]]
or:
SET <Alias>=<Value>[,CN:[ Callback]]
The object instance is set to the according value.
If callback is desired, the reply will contain „
SUCCESS
“ for a successful setting procedure
or „
NO SUCCESS
“for a failed setting procedure.
The specification of „
CN:
“ is optional. If the reply should be sent to another number than
the sender number of the monitor command, an additional space character and the call-
back number must be entered after „
CN:
“.
Valid objects for the easy 500/700 are:
Object Object short name Valid values
Digital registers M 0 or 1
Digital registers N 0 or 1
Table 4: Valid values for setting an object instance of the easy 500/700
Valid objects for the easy 800/MFD are:
Object Object short name Valid values
Digital registers M 0 oder 1
Analogue byte register MB 0 bis 255
Analogue word register MW 0 bis 65535
Analogue double word register MD -2147483648
bis 2147483648
Table 5: Valid values for setting an object instance of the easy 800/MFD
Example 1:
Setting the object instance M12 to 1
SET M12=1,CN:
In this case, an SMS is sent to the sender number of the command, which sets the value
of the object instance M12 to 1.
Example 2:
Setting the alias „Pump“ with password „SECRET“ and separate call-back
number „0123456789“
SECRET,SET PUMP=123,CN: 0123456789
In this case, the alias „PUMP“ is linked to an object „analogue byte register“, „ analogue
word register “ or „analogue double word register “.
19