INSYS GSM 4.3 easy, Add-On Manual

Page: 18 / 26

Functional Description INSYS GSM 4.3 easy
The specification of the character string “
CN:
” is required. If the reply should be sent to
another number than the sender number of the monitor command, an additional space
character and the callback number must be entered after the character string "
CN:
" (see
"Example 2" on the following side).
Valid objects for the easy 500/700 are:
Object Object short name
Digital inputs I
Extended digital inputs R
Digital outputs Q
Extended digital outputs S
Digital registers M
Digital registers N
Analogue inputs IA
Analogue outputs QA
Table 2: Valid objects of the easy 500/700
Valid objects for the easy 800/MFD are:
Object Object short name
Digital inputs I
Extended digital inputs R
Digital outputs Q
Extended digital outputs S
Digital registers M
Analogue byte register MB
Analogue word register MW
Analogue double word register MD
Analogue inputs
IA
Analogue outputs QA
Diagnosis bits D
LEDs L
Current program cycle time
Z
Time U
Table 3: Valid objects of the easy 800/MFD
Example 1:
Query of the object instance M12
MONITOR M12,CN:
In this case, an SMS is sent to the INSYS GSM 4.3 easy, which includes the command for
the query of object instance M12. The reply SMS should be sent to the sender phone
number which sent this command SMS to the INSYS GSM 4.3 easy.
Example 2:
Query of the alias „Pump“ with password „SECRET“ and separate call-back
18