EloStar Master 3X0 / 4X0 / - smart
Operation
Manual V.1.03H
65
7.12.4
Opening the Lock with Dual Code
Only if the two participating users carry out all kinds of authentication
assigned to them, the lock will open.
Settings
Via section
‘Settings’ of the PC software, the option
‘Dual code / 4-eyes (Opening)’ is activated.
Boxes
PIN code
/
Card
,
Release
and
Open locks
of
the user matrix have been and
Single code
has not
been marked for you. The lock master has registered
PIN code at the lock.
1.
Press key
Enter
and release it after a second.
The system checks its status. Date and time are on display.
2.
With menu key
<
or
>
select
Open
and confirm with key
Enter
.
Open
is on display. With more than one lock,
Lock: 1
is on display, too.
3.
If necessary, select the lock with menu key
<
or
>
and press
Enter
again.
Code entry &1 | Master
is on display.
4.
Present your user identification data.
Also see
‘User- / Personnel Numbers’ on page 51.
User no. | PIN code
is on display.
5.
According to your user settings, with
Enter
select
PIN code
or with
<
and
>
and
Enter
Code card
and carry on as usual when opening.
See the instructions ‘Opening a Lock…’ at the beginning of this chapter. Another
person is to perform the next step.
Code entry &2 | Master
is on display.
6.
A second user gives his authentication at the lock.
See steps 4 and 5.
Open | Please wait
is on display. The lock bolt retracts.
Open | Lock open: No.
is on display.
You have successfully opened the lock with dual code.
