EloStar Master 3X0 / 4X0 / - smart
Operation
Manual V.1.03H
61
7.11
Operation with CIT Function Selected
Caution
Without an authorised CIT master with PIN code registered, the
second user group (CIT user) cannot be administrated.
Authorise user no.99 with all rights required
before you activate
the CIT function
(see paragraph ‘Authorising the Users’ and
register PIN code for user no.99 at the lock.
With or without CIT function, operation procedures are the same for users of systems
before version EM05.
From this versi
on onwards, the system manager can set via field ‘Opening (user groups):’
of section “2 user groups” (select option in order to display field) on tab ‘Settings’ of the
PC software, whether group members, in case they cannot open alone (with options
‘dual code’ or ‘parallel code’ set),
- can
open with members of their own group only (value: „same“) or
- can open with members of the other
group only (value: „different“) or
- can open with another person of any group
(value: „none“).
If option
‘CIT’ is activated (also see ‘Activating the CIT function’ in this chapter), the users
of every lock will be split into two groups. The size of the groups can be defined via
TwinComm USB (ex works: group 1 consists of users 01-50 with lock master and group
2 consists of users 51-98 with CIT master).
The lock master administrates the first group (users 01 to XX-1).
User 99 turns CIT master and administrates the CIT users (user XX to 98).
7.11.1
Selecting the Master / CIT master
Lock- and CIT master select
‘Master’ / ‘CIT master’ before entering code:
1.
Follow the steps of an instruction until code input is required.
Before code input is required from the master or the CIT master,
Code entry | User: Master
is displayed.
2.
Confirm
Master
with
Enter
or with menu key
<
or
>
select
CIT master
and press key
Enter
.
CIT master
or
Master
,
Code entry
,
0123456789
, as it may be,
and
Code:
are displayed.
3.
Continue following the instruction.
You have successfully selected master / CIT master.
