insys icom Pocket ISDN, Manual

Page: 20 / 84

Connections and LEDs INSYS Pocket ISDN
20
6 Connections and LEDs
6.1 Front Panel
Figure 2: LEDs on the front panel
Description Colour LED off LED on
L1 green Displays the state of the INSYS Pocket ISDN in encoded form
L2 yellow Displays the state of the INSYS Pocket ISDN in encoded form
B1 yellow B channel 1 offline B channel 1 online
B2 yellow B channel 2 offline B channel 2 online
R red No data is received Data is received
T red No data is sent Data is sent
DCD red No connection established Connection to remote terminal is es-
tablished
DTR red DTR line not activated DTR line activated
Table 4: Description of the LEDs on the front panel
The two LEDs L1 and L2 display the state of the INSYS Pocket ISDN according to
following table in encoded form.
L1 L2 Status Action
on blinking Start-up process Wait for start-up process
blinking off ISDN error Check ISDN interface/connector
on off active ISDN OK, no ISDN connection established
on flashing Call ISDN connection is being established
on briefly
off
Sync active Waiting for B channel synchronisation
on on Connection Data connection is established
off off TA error Hardware error, TA repair necessary
off blinking TA error Hardware error, TA repair necessary
flashing flashing Bootloader ac-
tive
No working firmware; update firmware
Table 5: Device status encoding by LED L1 and L2
L1
L2
B1 R DCD
B2 T DTR
Pocket
ISDN