Functions
i-modul ISDN HIX V4
In order to initiate an automatic call, use
the command
The parameter <n> defines the event, that
triggers the connection establishment.
Replace <n> with the value
- "6" for a connection establishment if the
control line DTR is active;
- "7" for a connection establishment if data
are received at the serial interface;
- "8" for a connection establishment
independent of a control line;
In order to disable the automatic call, use
the command
cmds=0
in order to determine a baud rate at the
serial interface, which is set during the
automatic call, use the command
The automatic baud rate detection is
disabled during the automatic call.
br=<n>
In order to view the configurable baud
rates, use the command
br?
In order to configure the reset timer, use
the command
Set the reset timer to a value of at least
4 seconds. For this, replace "n" with a value
in tenths of a second (e.g. 4 seconds is
n=40).
rsttim=<n>
Save the settings with the command
save
In order to exit the TA+Configurator and
enable the function of the automatic call,
use the command
go
Further optional settings:
Termination of the call after n seconds of
an unsuccessful call. n = 3..255 (default:
15).
cato=<n>
22