insys icom i-modul 144/56k, Designer'S Manual, Page: 53 / 63

i-modul Modem 144/56k S Registry
S36* Resetting the error logs
Bit Meaning
Bit 0..2 Determines what hap-
pens if an attempt to
establish a V.42 LAP-M
connection fails. It is
connected to the registry
S48.
0 Modem hangs up
1 Modem stays online and establishes a direct
mode connection.
2 Reserved
3 Modem stays online and establishes a normal
mode connection.
4 Modem attempts to establish an MNP
connection. In case of failure it hangs up.
5 Modem attempts to establish an MNP
connection. In case of failure a direct mode
connection is established.
6 Reserved
7 Modem attempts to establish an MNP con-
nection. In case of failure a normal mode
connection is established.
Bit 3..7 Reserved Reserved
S38 Time period until forced hang up
Maximum time left for the buffers to empty their data, after a command to hang
up has been received. Only applies to error corrected connections.
S39* Flow control
Selection of the data flow control between PC and modem
S39=0
No data flow control (
AT&K0
)
S39=3 RTS/CTS data flow control (
AT&K3
)
S39=4 XON/XOFF data flow control (
AT&K4
)
S39=5 Transparent XON data flow control (
AT&K5
)
S39=6 RTS/CTS and XON/XOFF data flow control
53