i-modul Modem 144/56k
Functions
6.8.2
Saving the Configuration
If the configuration of the i-modul Modem 144/56k 3.0 basic has been adapted to
the requirements of the user, it is possible to save the settings in user profile 0 or 1.
Changes of the configuration get lost after a RESET or restart, if the have not been
saved before.
Configuration with AT commands
In order to save the current configuration to
user profile 0, use the command
AT&W
AT&W0
In order to save the current configuration to
user profile 1, use the command
AT&W1
6.9
Reset
There are several methods to reset the i-modul Modem 144/56k 3.0 basic: by
cutting off the supply voltage, by connecting the terminal “RESET” with the
terminal „GND, and by using an AT command.
Configuration with AT commands
To reset the i-modul Modem 144/56k 3.0
basic, use the command
ATZ
To reset the i-modul Modem 144/56k 3.0
basic and load the settings stored in user
profile „0“, use the command
ATZ0
To reset the i-modul Modem 144/56k 3.0
basic and load the settings stored in user
profile „1“, use the command
ATZ1
To reset the i-modul Modem 144/56k 3.0
basic to factory defaults, use the command
AT&F&WZ
23