INSYS GSM small 2.0
Operating Principle
4.
SYS GSM small 2.0 using AT commands.
ands can be found in the "AT Command
Reference".
5.
ed
immediately. We still recommend sending the command
AT&W
to the
tep to ensure that all
e next restart.
10.2
r the parameters of the most im-
portant AT commands of the INSYS GSM small 2.0. The operation is mostly
com web-
software HSComm.
d to the PC and switched on.
The software HSComm GSM is installed on the PC.
1.
Start the program HSComm GSM.
t
settings can be read out using the
Configure the IN
A reference of the AT comm
Save your entries with
AT&W
.
Not all configurations at the INSYS GSM small 2.0 need to be saved
actively by entering
AT&W
. Some settings are automatically sav
INSYS GSM small 2.0 as your last configuration s
settings are stored safely and are available for th
Operation with HSComm GSM/GPRS
The software HSComm allows a comfortable configuration of the INSYS GSM
small 2.0. HSComm provides an interface fo
self-explanatory. You can download the software from the INSYS i
site (http://www.insys-icom.com/software).
Configuring and operating the INSYS GSM small 2.0 with HSComm
How to configure the INSYS GSM small 2.0 with the
The INSYS GSM small 2.0 is connecte
The program starts.
An “Win Error Code” error message during program start indicates
missing COM interfaces in the operating system.
A progress bar appears in the field on the right if auto-recognition a
program start is enabled in the program settings of HSComm.
If this option is not enabled, the
Read settings button in the field on the right. It is always recom-
mended to read out the settings first that no data get lost when send-
ected INSYS GSM small 2.0 and
tries to read out the settings.
The settings are read out after a short period. A message window in-
dicating "Settings read" is displayed.
ing later.
Now, the program searches for a conn
33
