Functions
INSYS GSM 4.3
12.19.1
SWITCH Command for Controlling the Control Outputs
The INSYS GSM 4.3 provides the command
SWITCH
for switching the control out-
puts using clear text names (switch alias). The clear text commands can then be
transmitted to the INSYS GSM 4.3 via terminal program or SMS, to execute the
respective switch operations. For this, the clear text names must be assigned to the
respective SWITCH command before.
The clear text names may have a length of up to 15 characters. Only
the letters A-Z as well as the digits 0-9 may be used. They must also
contain no empty spaces. Capitalization is ignored. If a clear text name
is defined more than one time, only the first command with this clear
text name will be executed.
Configuration with HSComm
In order to use clear text names for switch commands, select on the
“Control Output” tab on the “Control output” panel the activation “by
command”.
In order to assign a clear text name to a switch command, enter on the
“Control Output” tab on the “Switch alias definition” panel the desired
clear text name (switch alias) into the entry field of the respective action.
Configuration with AT commands
In order to assign a clear text name to a
switch operation, use the command
Replace the parameters as follows:
<output>
with
1 for control output 1, and
2 for control output 2
<action>
with the number of the respec-
tive pulse number or “0” for a continuous
activation of the output
<text>
with the desired clear text name
AT**SWITCHENTRY<output
>,<action>=<text>
In order to assign the clear text name
“Pump” to the switch command “Pulse
output 1 3x” for example, use the com-
mand
AT**SWITCHENTRY1,3=Pum
p
In order to assign the clear text name
“LightON” to the switch command “Enable
output 2” for example, use the command
AT**SWITCHENTRY2,0=Lig
htON
66