Functions
INSYS GSM 4.3
ent number”. In order to send the message to further recipients, change
to the “Additional Recipients” tab. Activate the check box in the matrix
of the respective input for the respective recipient and the number (cor-
responds with the number of pulses) of the message. Enter the number
of the additional recipient into the entry fields “recipient 1-20”.
In order to delete the assignments for additional recipients, click onto the
“delete all connections” button.
In order to establish a voice connection to a specified phone number in
case of an alarm at the input, select on the “Alarm” tab for the respective
alarm input of the INSYS GSM 4.3 “single alarm” in the drop-down list
“alarm trigger”. Select “voice” as medium for the alarm transmission via
the drop-down list “alarm transmission by”. Enter the phone number, to
which the voice connection is to be established, into the entry field “re-
cipient number”.
Configuration with AT commands
In order to configure the behaviour of the
INSYS GSM 4.3 in case of an alarm at the
inputs, use the command
Replace here
<in>
with the input number
<mode>
with the number of the action,
where the following is valid:
0 for no action (no dispatch)
1 for single SMS dispatch
2 for single message dispatch via data con-
nection
3 for message output via data connection,
hang up after message dispatch
4 for pulse-based SMS dispatch
5 for the establishment of a voice connec-
tion
AT**INPUT<in>=<mode>
In order to read out and store the phone
number of the SMS Service Center from
the SIM card, use the command
Please note that a capital “S” must be en-
tered!
AT**SCN=S
In order to enter the phone number of the
SMS Service Center, use the command
Replace
<number>
with the phone number
of the SMS Service Center. If no number is
entered behind the “=”, the SMSC number
will be deleted.
AT**SCN=<number>
62