manualshive.com logo in svg

insys icom GSM 4.3 compact, Manual, Page: 32 / 94

Share
Download
insys icom GSM 4.3 compact Manual Download Page 32

Mounting 

INSYS GSM 4.3 

 

 

Disconnecting the power supply 

 

The device is mounted to the DIN rail. 

 

The power supply is connected and switched off. 

1.

 

Disconnect the ground lead of the power supply from the terminal "GND". 

2.

 

Disconnect the plus pole of the power supply from the terminal for the 
power supply. 

 

The INSYS GSM 4.3 is disconnected from the power supply. 

 

Uninstalling the device from the DIN rail 

 

How to uninstall the INSYS GSM 4.3 from a DIN rail in a switch cabinet: 

 

You will need a Phillips screwdriver with a 4.5 mm blade. 

 

The power supply of the switch cabinet is switched off and secured against 
being switched on accidentally. 

 

All cables at the INSYS GSM 4.3 are disconnected. 

1.

 

Insert the Philips screwdriver into the groove in the bottom of the INSYS 
GSM 4.3 as shown in the following figure. 

 

 

2.

 

Turn the Philips screwdriver into the direction of the INSYS GSM 4.3 as 
shown in the following figure.  

32 

 

Summary of Contents for GSM 4.3 compact































































































Reviews:

No comments