34
CV Expansion
Spray CV Input:
The Spray CV Input is a bipolar control voltage input for
the
Spray
parameter.
•
Control voltage is summed with the knob position.
•
Input range: 10V. e.g. a voltage difference of 10V is needed to
control from the minimum to maximum knob position. If the knob is at
its centre position, the accepted input range is -/+5V.
Layer CV Input:
The
Layer CV Input
is as bipolar control voltage input
for the
Layer
parameter.
•
More than 360 degrees of movement is accessible via positive and
negative control voltage.
•
Input range: -/+5V.
•
Modulating the
Layer
parameter between 0V and 5V with external
control voltage will enable two clockwise cycles through all six
layers from the currently selected layer.
•
Modulating the
Layer
parameter between 0V and -5V with external
control voltage will enable two anticlockwise cycles through all six
layers from the currently selected layer.
Grain Direction CV Input:
The
Grain Direction CV Input
is a bipolar
control voltage input for the
Grain Direction
parameter.
•
Control voltage is summed with the knob position.
•
Input range: 10V. e.g. a voltage difference of 10V is needed to
control from the minimum to maximum knob position. If the knob is at
its centre position, the accepted input range is -/+5V.
