Quick-Start Guide
POWERLINC
TM
MODEM - INSTEON USB
INTERFACE (DUAL BAND)
USB Interface (#2413U)
INSTEON
TM
PowerLinc interface with USB communications for full-time software
applications.
USB Port
N
Ne
ee
ed
d H
He
ellp
p?
? F
Fo
orr a
as
ss
siis
stta
an
nc
ce
e c
ca
allll yyo
ou
urr ffrriie
en
nd
dllyy
s
su
up
pp
po
orrtt p
pe
errs
so
on
n @
@ 8
80
00
0--7
76
62
2--7
78
84
46
6
Key Features
• No background software needed with computer programs
• Straightforward and simplified command set
• Easy and trouble free USB connection
• Stores over 2,016 INSTEON Links in 128Kb of non-volatile memory
• Communicates via powerline and RF INSTEON for maximum reliability
Connecting PowerLinc Controller Interface to the Computer
1. Insert included Driver CD into your CD-ROM Drive
Auto launch Dialog Box will appear
2. Plug PowerLinc Modem into an AC outlet, plug square end of included USB cable into PowerLinc Modem’s USB jack and
rectangular end of USB cable into an available port on your PC
Found New Hardware Wizard will appear
3. Follow instructions to add your FT232R USB UART driver
Windows will search for the proper driver, then wizard will display Completing the Found New Hardware Wizard
4. Click Finish
Another Found New Hardware Wizard dialog will appear
5. Follow instructions to add your USB Serial Port driver
Windows will search for the proper driver, then wizard will display Completing the Found New Hardware Wizard
6. Click Finish
Pairing with an Access Point
1. Be sure PowerLinc Modem is plugged in and powered (LED will blink when Set button is tapped)
2. On your PowerLinc Modem USB, tap the SET button four times rapidly
PowerLinc Modem’s LED will turn on green
3. Plug your Access Point into another outlet
4. Look at the Access Point’s Status LED:
• If it is bright and steadily on, go to step 5
• If it is blinking or dim, repeat step 3, trying another outlet
Note: You may need to try several outlets. If you are unable to locate an outlet please call 800-762-7846 for assistance.
5. Tap and release the SET button on the PowerLinc Modem, USB.
The Status LED on PowerLinc Modem will turn off and Access Point’s Status LED will go dim and remain steadily on
