Page 1: ...nd pull it out from the junction box Step 4 Disconnect the wires from the switch you are replacing and ensure you have 1 2 of bare wire on the ends Step 5 If you are installing the On Off Switch into...
Page 2: ...lug In Dimmer s SET button for 3 seconds until the lamp it con trois flashes then release li0 The On Off Switch will exit Linking Mode and its LED will stop blinking On Off Adapter Press and hold the...
Page 3: ...NSTEc N COMPATIBLE To factory reset your On Off Switch 1 Press and hold the Paddle Top for 10 seconds then release 2 Tap the SET Button all the way in then release 3 Push the SET Button all the way In...
Page 4: ...e is not used so you will cap it off at both ends with a wire nut The other TRAVELER number 2 the black one you will convert to a LINE wire In the junction box where the Secondary is connect TRAVELER...
