20
Initial Test Run
Follow these steps to ensure your cooker is operating properly.
1.
Release the lid lock and lift the lid.
2.
Remove the inner pot.
3.
Place the Steam Rack in the bottom of the inner pot.
4.
Add only 2 ounces of clean water to the inner pot.
5.
Return the inner pot to the cooker and close the lid.
6.
Plug the power cord directly into a 120V power outlet. Display reads
“
OFF
” indicating that the cooker is in Standby mode.
7.
Press the
Steam
Smart Program control.
8.
Press
Start
. The Display counts down cooking time in hours and minutes
until 1 minute remains, then in seconds.
9.
When the Smart Program ends, the cooker beeps 5 times, Display reads
“
END
” and the Keep Warm program begins.
10.
Press
Cancel
to end the
Keep Warm
program.
CAUTION
The cooker may be hot during and after cooking. Do not touch hot surfaces.