ASSEMBLY INSTRUCTIONS
CHAIR STYLE RTA-5006
PARTS LIST
ATTENTION: Before you begin to assemble the
product, please make sure that all the parts are
included in the package and in good condition
ATTENTION:
Follow the instructions step by step.
To avoid misalignments, leave the screws loose and do not tighten them until all are in their respective places.
Do not overtighten or force the screws as they could break, strip, or damage the threads of the holes.
Using the wrong size of screws on a part could result in damage to the screw or the part.
E1
E2
F
C
B
D
B
I
Insert the casters (F) in the legs of
the base (C) using pressure, then
place the gas lift (E1) in the middle of the
base and cover it with (E2) as shown.
Flip over the seat (B) with its back end
towards you and assemble the
armrests (G) in the respective sides using
screws (I) for the exterior holes and screws
(J) for the interior holes as shown.
Assemble the backrest (A) to the seat (B) using screws (K).
Using screws (H), assemble the
mechanism (D) to the seat (B) with its
handle facing to the LEFT as shown.
Place the top parts over the base parts making sure the tip of
the gas lift enters into the hole of the mechanism.
(Armrests;
exterior holes)
(Backrest)
Before seating and using the chair for the first time,
make sure that all screws are properly tightened.
A
When you seat on the
chair, not looking at it.
(Mechanism)
G (Right)
H
I
J
(interior only)
G (Left)
(exterior)
(exterior)
B
K
Seat
B
x1
A
x1
Backrest
Star Base
C
x1
Mechanism
D
x1
Hydraulic
Gas Lift
E1
x1
Covers for
Gas Lift (Set)
E2
x1
Casters
F
x5
Armrest
G
M8x25mm
H
x4
M6x25mm
I
x4
M6x30mm
J
x4
M8x55mm
K
x4
Allen wrench
L
x1
x1
Right
x1
Left
(Armrests;
interior holes)
IDA-5006
