PARTS LIST
ATTENTION: Before you begin to assemble the
product, please make sure that all the parts are
included in the package and in good condition.
ASSEMBLY INSTRUCTIONS
CHAIR STYLE RTA-1010
Insert the casters (F) in the legs of the
base (C) using pressure, then place the
gas lift (E) and the cover (I) in the middle
of the base as shown.
Assemble the backrest (A) to the
mechanism (D) from underneath the
metal plate using screws (L) and
washers (O) as shown.
Using screws (K) and washers (O),
assemble the mechanism (D) to the seat
(B) with its knob facing to the FRONT as
shown.
Place the top parts over the base parts
making sure the tip of the gas lift enters
into the hole of the mechanism.
Before seating and using the chair for
the first time, make sure that all
screws are properly tightened.
C
E
I
F
B
K+O
D
L+O
A
5-Star base
Backrest
Mechanism
Hydraulic
Gas Lift
Right armrest
Casters
F
x5
Seat
Ø 8x20mm
Ø 6x25mm
Base Cover
Headrest and base,
SET
Ø 6x20mm
(Mechanism)
(Mechanism, backrest)
L
x3
E
x1
D
x1
C
x1
A
x1
B
x1
H
x1
I
x1
J
x6
K
x4
(Armrests)
ATTENTION:
• Follow the instructions step by step.
• To avoid misalignments, leave the screws loose and do not tighten them until all are in their respective places.
• Do not overtighten or force the screws as they could break, strip, or damage the threads of the holes.
• Using the wrong size of screws on a part could result in damage to the screw or the part
1
2
3
4
5
6
M
x1
N
x1
Washers
O
x7
When you seat on the chair, not looking at it.
Ø 8x15mm, SET
(Backrest)
P
x1
(Front of the seat)
Left armrest
GL
GR
M
N
Allen wrench SET,
(Headrest)
x2
x1
Ø 6x30mm
(Headrest)
4mm 5mm 6mm
First assemble the base of the headrest
(H) to the backrest (A) using screw (M)
and then assemble the headrest using
screw set (N) as shown.
P: 5mm
P: 6mm
P: 4mm
B
D
H
1st
2nd
H
Flip over the seat (B) with its front
towards you, and assemble the armrests
(G) in the respective sides using screws
(J) as shown.
(Front end of the seat)
B
G (Right)
G (Left)
J
P: 5mm
CHAIR STYLE IDA-1010
