Zigbee Blinds Actuator Mini
Zigbee Blinds Actuator Mini
Art. no.: 57008000
Operating instructions
1
Safety instructions
To avoid possible damage, read and follow the following instructions:
Installation only by persons with sound knowledge and experience in the following areas:
–
5 safety regulations and standards for the installation of electrical systems
–
Selection of suitable tools, measuring devices, installation materials and, if necessary,
personal protective equipment
–
Installation of the installation material
–
Connection of devices to the building installation under consideration of local connection
conditions
Improper installation endangers your own life and the lives of users of the electrical system and
there is a risk of serious damage to property, e.g. through fire. You are at risk of personal liabil-
ity for personal injury and damage to property.
Contact an electrical contractor!
Risk of injury. Use the device only for controlling Venetian blind and roller shutter motors or
awnings. Do not use it to switch other loads.
For parallel connection of several motors to an output it is essential to observe the correspond-
ing instructions of the manufacturers, and to use a cut-off relay if necessary. The motors may be
destroyed.
Use only venetian blind motors with mechanical or electronic limit switches. Check the limit
switches for correct adjustment. Observe the specifications of the motor manufacturers. Device
can be damaged.
Read the instructions in full, observe them and keep them for future reference.
2
Device components
Figure 1
(1)
Venetian blind actuator
(2)
Button Prog.
(3)
LED
(4)
Terminals
3
Intended use
–
Zigbee actuator for controlling electrically driven Venetian blinds, shutters and awnings
–
Zigbee transmitter to operate Zigbee-compliant Venetian blind drives
–
Operation of Zigbee-compliant transmitters or connected Venetian blind push-buttons
1 / 7
82403600
18.08.2020
