Inspur OB5161M5 User Manual Download

Page: 87 / 115

●

The name of the Web interface is displayed on top left of the interface.

●

The meanings of all buttons on top right of the interface:



Click on the Overview button, to return to the overview page.



Click on the Refresh button, to refresh the page.



Click on the UID button, to turn on/off the UID LED.



Click on the Power button, to turn on/off the server.



Click on the Language button, to change the language (which supports

Chinese and English).



Click on the Help button to query help information on the corresponding page.



Click on the Logout button, to return to the login page.

●

The navigation tree is on the left. Via the nodes on the tree, you can select different

functional interfaces. The following functions are included:

•

View the overall situation

•

View system information

•

Remote control

•

Power management

•

Event and log query

•

Real-time monitoring

•

Diagnosis and orientation

•

System maintenance

Summary of Contents for OB5161M5




















































































































Search results

Summary of Contents for OB5161M5

Reviews:

Related manuals for OB5161M5

Brands by name

Popular brands

Inspur OB5161M5, User Manual

Search results

Summary of Contents for OB5161M5

Reviews:

Related manuals for OB5161M5

Brands by name

Popular brands