7
Press SET to recall total accumulated data as follows: Step / Distance / Calories / Exercise
Time.
Press and hold RESET button for 2 seconds to clear the data.
ALARM MODE
Press MODE to enter into
ALM
.
Press and hold SET button for 2 seconds to set the alarm.
Press RESET button to increase the value, while press MODE button to decrease the value.
RESETTING THE PEDOMETER
There are two different ways to RESET your pedometer: DAILY RESET and FULL RESET
To perform a DAILY RESET, Press & Hold RESET for 2 seconds while in STEP, DISTANCE,
CALORIES or EXERCISE TIME MODE. The data for the current day is erased.
To perform a FULL RESET, Press & Hold RESET for 2 seconds while in TOTAL MEMORY MODE to
erase all accumulated data and reset the pedometer to factory fresh condition.
NOTE: Reset any of the step, distance, calories burned, exercise time data will cause all date
mentioned above for current day being erased.
USB CONNECTION
If you want to upload the data to your PC, firstly you need to install the driver from the CD to your
computer.
After installed the pedometer driver, plug the supplied USB cable into the USB port and connect it to
your computer.
1. Run the software.
2. For the first time to use, you are required to register your pedometer in the software by clicking
“Create New Profile”.
3. Log into the system with your user name and password.
