5
POWER INPUT REQUIREMENTS
This product requires 220-240 V power and a well-grounded socket, as shown in the picture below.
Make sure the power socket was installed by a qualified technician.
Cables should be transported according to the corresponding laws of your country. High pressure
cables, low pressure cables und underground cables should be transported separately and cannot be
connected or tangled with other cables.
Improper power cord connection can result in the risk of an electric shock. Check with a qualified
electrician or serviceman if you have any doubts that the product is properly grounded. Never modify
the provided power cord. If it does not fit the outlet, have a proper one installed by a professional
electrician.
LEVELLING
If the surface is not even and not all the support legs are fixed, the stepmill will wobble when you start
to use it. This can cause vibrations or make the device lean tilt.
How to level the stepmill:
1. Loosen the A nut by turning in counter-clockwise.
2. Adjust the foot pad B to the desirable height.
3. Lock the A nut tightly in a clockwise direction.
4. Use the same method to adjust all the foot pads.
