11
MAINTENANCE AND STORAGE
Make sure the product is turned off and unplugged before maintenance.
Clean rubber surfaces with a damp soft cloth and warm water. For more durable dirt, you can use non-
aggressive cleaners.
Do not use thinners, aggressive cleaners, solvents, etc.
Only use the dry cloth to wipe the controller. Moisture and water can damage the controller.
Make sure that the product is turned off and unplugged before storing the product.
Store the platform in a dry and shady place.
Protect from dust, high temperature and humidity.
TROUBLESHOOTING
Č.
Problem
Cause
Solution
1
The product will not turn on
It is not plugged in
Plug in the electricity
Power switch off
Turn on the power switch
Burned fuses
Replace the fuses
2
The engine makes sounds
during exercise
Common mechanical sounds
Not necessary
3
The controller does not work
Low battery
Replace the batteries
Insufficient reach
Range is 2.5 m
4
Sudden shutdown
Exiting the exercise
Turn the product off and on
5
Jamming
Too many commands sent
Restart the device
6
ER01 / ER02
The engine is not working
Contact the supplier
Always contact your supplier in the event of error.
SPECIFICATIONS
Name
4D Vibration plate
Item No
19893
Voltage
220 V
Frequency
50 / 60 Hz
Power
440 W
Made
China
ENVIRONMENT PROTECTION
After the product lifespan expired or if the possible repairing is uneconomic, dispose it according to the
local laws and environmentally friendly in the nearest scrapyard.
By proper disposal you will protect the environment and natural sources. Moreover, you can help
protect human health. If you are not sure in correct disposing, ask local authorities to avoid law
violation or sanctions.
Don’t put the batteries among house waste but hand them in to the recycling place.