Insportline IN 24097, User Manual

Page: 13 / 29

13
BUTTONS
START
If the device is plugged in and the safety key is inserted, press the button to
turn on the treadmill
STOP
During operation, pressing the button stops all operations and the data returns
to the default values.
MODE
In standby mode, select a program: time countdown 30:00, distance countdown
mode 1.0, calorie countdown mode 50.0, step countdown mode 5000.
The function will flash during selection.
Use the SPEED +/-, I/- buttons to adjust the values, press START to
start the program.
PROGRAM
Press the button to select the preset program P1 - P12, FAT. (P1 - manual
program, P2 - interval program, P3 weight loss program, P4 - walking).
In climb mode, you can select programs P1 - P6.
QUICK PROGRAM
BUTTONS
You can select: P1 - manual program, P2 - interval program, P3 weight loss
program, P4 - walk, P5 - run, P6 - climb.
RUN
In standby mode, press the button to enter run mode, it does not work in climb
mode.
CLIMB
In standby mode, press the button to enter the climb mode, it does not work in
run mode.
-SPEED+
In settings you can adjust the values, during operation you change the speed
by 0.1 km / h. By holding down the button, the value will change gradually.
-
In settings you can adjust the values, during operation you change incline by
0.5. By holding down the button, the value will change gradually.
SPEED 6,8,10 Quick speed selection button 6, 8, 10.
NÁKLON 3/10,
5/20, 7/30
In run mode, change the incline to 3 /5 /7.
In climb mode, change the tilt to 10/20/30.
PROGRAMS
QUICK START
Turn on and insert the safety key. Press START and the treadmill starts at 0.8 km / h after a 3-second
countdown. You can change the speed and incline as needed.
MANUAL MODE
In standby mode, press START, the treadmill will start at 0.8 km / h, all values will be added from 0.
You can use the SPEED and INCLINE buttons to adjust the speed and incline values.
In standby mode, press MODE to enter the countdown setting. The value on the TIME display will
flash. Use the SPEED and INCLINE buttons to set the value from 5:00 to 99:00.
Press MODE 2x to set the distance countdown. The display shows 1.00. Use the SPEED and
INCLINE buttons to set the value from 0.50 to 99.90.
Press MODE 3x to set the calorie countdown. The display shows 50.0. Use the SPEED and INCLINE
buttons to set the value from 10.0 - 999.
Press START to start the program after setting the values. During exercise, you can adjust the speed
and incline using the SPEED and INCLINE buttons. Press STOP to stop the treadmill.
PRESET PROGRAMS
You can select programs using the quick selection buttons or by selecting in the menu after pressing
PROGRAM. The TIME display will show the set original value 30:00 which will flash. You can change
the program run time using the SPEED and INCLINE buttons. Press START to confirm the setting and