10
USE
POWER UP AND START-UP
1. Plug in the socket
2. Plug in the chair
3. Turn the switch up
STANDBY MODE
No function can be selected in standby mode.
STARTING THE MASSAGE
Press the chair switch to start. The back and leg rests are adjusted to their default position.
After sitting, the chair automatically detects the position of the shoulders and body. Wait until detection
is complete, or press "OK" to skip detection. After starting the automatic massage, the massage starts
with preset values.
An audible signal sounds when the shoulder detection is complete. You can adjust the position of the
shoulder massage heads manually using the "UP" and "DOWN" buttons. You can set up to 11
positions of the massage heads. If the position of the shoulders is not adjusted within 10 seconds, the
massage will start automatically. You can skip the settings by pressing "OK". If the position of the arms
cannot be detected, the automatic massage starts with preset values.
