8
STEP 6
Unfold the handlebars (17, 18) and the extension arms (14) as shown in picture. Attach the extension
arms (14) to the pivot connector (10) using locking knobs (13).
STEP 7
Install two AA batteries into the meter (37). Batteries are not included. See page 12 for detailed battery
installation instructions. Connect the extension wire (39) to the meter (37). Attach the meter (37) to the
plate on the meter post (31) using round-head screws M5x0.8x12 mm (49).
STEP 8
Slide the seat assembly (42, 43) onto the center beam (1). Attach the seat stoppers (3) to the back
end of the center beam (1) using button-head bolts M8x1.25x25 mm (53). Also, please verify that the
other seat stoppers (3) at the front end of the center beam (1) are assembled at the factory.
STEP 9
Press the center beam cap (2) into the back end of the center beam (1).
