INSOFT, LLC
INSOFTUSA.com
Camera Stand HDV-CS
Installation Guide
WHAT’S IN THE BOX
1) Black dome with neck (
1” / 25mm D)
2) Smartpole X1S with accesories
3) Fully threaded steel
stud (4’’ L)
Bag with items 4 through 7:
4) Hex nut
5) Locking washer
6) Big washer
7) Plastic cable ties
FOLLOW THESE STEPS FOR THE CORRECT INSTALLATION OF THE PRODUCT
IN A STUDIO TABLE:
1)
Drill a ¼” hole in the studio table where you want the
camera to be located.
Camera location estimations: 20” to 30” from the subject,
for a close-up of the subject when using Logitech C920
camera. Place the camera further away from the subject
for wide angle shots.
Exact location of the camera and drilling hole will depend
on the camera being used.
2)
Insert the stud into the drilled hole.
3)
Use lock washer and big washer provided to secure the
nut below the table. Screw nut to threaded stud below the
table until firmly adjusted.
4)
Adjust height of the stud moving the black dome and nut
until desired position.
Table
Big washer
Locking washer
❷
❸
❶
Hex nut
