28
32"/55" 1080p, 60Hz, LED Insignia Roku TV
www.insigniaproducts.com
Digital audio using the HDMI 1/ARC jack
Your Insignia Roku TV can send sound to an ARC device, like an AV receiver, to create a home theater that uses two or
more speakers.
When you connect external speakers or a sound bar, sound plays through your Insignia Roku TV speakers and the
external speakers or sound bar.
1
Make sure that your Insignia Roku TV’s power cord is unplugged and the digital speaker system or sound bar is
turned off.
2
Connect an HDMI cable (not provided) to the
HDMI 1/ARC
jack on the back of your Insignia Roku TV and to the
HDMI IN
jack on the digital speaker system or sound bar.
3
Plug your Insignia Roku TV’s power cord into a power outlet, then turn on your Insignia Roku TV.
4
Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5
To turn off your Insignia Roku TV speakers, on the Home menu, press or to highlight
Settings
, then press
OK
.
Highlight
Audio
, then press
OK
. Highlight
TV speakers
, then press
OK
. Press
OK
to remove the check from the
TV
speakers enabled
check box.
6
To configure the
HDMI 1/ARC
jack to output sound to an ARC device, on the Home menu, press or to highlight
Settings
, then press
OK
. Highlight
System
, then press
OK
. Highlight
Control other devices (CEC)
, then press
OK
.
Highlight
HDMI ARC
, then press
OK
to check the box.
On your TV
ARC audio device
Sound bar
HDMI cable
connector
HDMI 1/ARC
jack
Back of TV
