
39
NS-TWM45W1
www.insigniaproducts.com
USER MAINTENANCE INSTRUCTIONS
Cleaning the exterior
• Use a soft cloth to wipe up all detergent, bleach, or other spills as they occur.
Cleaning the interior
• Clean the interior of your washer periodically to remove any dirt, soil, odor,
mold, mildew, or bacterial residue that may remain in your washer as a result
of washing clothes.
Failure to follow these instructions may result in unpleasant
conditions, including odors or permanent stains in your washer or on
your laundry.
• To remove hard water deposits, use a cleaner labeled “Washer safe.”
Cleaning the control panel
• Clean with a soft, damp cloth. Don’t use abrasive powders or cleaning pads.
• Don’t spray cleaners directly on the panel. The control panel finish may be
damaged by some laundry pre-treatment soil and stain remover products.
Apply such products away from your washer and wipe up any spills or
over-spray immediately.
Cleaning the detergent, bleach, or softener compartment
• To remove laundry product residue, wipe with a damp cloth and towel dry.
• You can remove the detergent and softener compartments to clean them.
However, the bleach compartment isn’t removable, so you must flush the
compartment while it is in your washer.
Cleaning the tub
The
Tub Clean
cycle is a self-cleaning cycle that removes the causes of odors that
may occur inside your washer without using a cleaning agent. We suggest
cleaning the tub about once a month.
1
With the tub empty, add one cup of chlorine bleach to the bleach dispenser.
2
Press the
Power
button.
3
Turn the cycle selector to
Tub Clean
. When you select
Tub Clean
, the only
option you can change is the
Delay
option.
4
Press the
/Start/Pause
button.
Storing your washer
You can damage your washer if you don’t remove water from hoses and internal
components before storage.
To prepare your washer for storage:
1
Select the
Quick Wash
cycle and add bleach to your washer. Run your washer
through the cycle without a load.
2
Turn the water faucets off and disconnect the inlet hoses.
CAUTION:
Never use the
Tub Clean
cycle when laundry is in your washer. This may damage the
laundry or your washer.