PACKAGE CONTENTS
• Desktop Power Station
•
Quick Setup Guide
FEATURES
• Six AC outlets:
Provide
continuous AC power
• Three USB charging or
power ports, 6.3A total
charge current:
Fast
charging for three
smartphones or tablets
• 32 dB EMI/RFI noise filtering:
Assures that your devices receive only “clean” power for
maximum product performance
• 900 joules surge protection:
Protects your devices from damaging power surges and
spikes
• Protected LED indicator:
Lights when the surge protection feature is working
properly. If this LED does not light or goes out, the surge protection feature has
reached full capacity and can no longer absorb additional surges and spikes. The surge
protector should be replaced if this light goes out
• Innovative design:
Practical and convenient, ideal for the desk, conference table, or
home
• USB-IF Certified:
USB charging ports comply with USB-IF standards
USING YOUR DESKTOP POWER STATION
1
Plug the power cord of the power station into a standard 125V AC outlet. If the LEDs
do not light up, press the main power switch/circuit breaker on the side of the unit.
2
Plug the power cords from up to six devices into the AC outlets on the surge
protector.
3
Plug you USB devices into the USB ports to charge them.
TROUBLESHOOTING
SAFETY INFORMATION
• RISK OF ELECTRIC SHOCK - Use only in dry locations and only indoors.
• DO NOT plug into another relocatable power tap.
• DO NOT “daisy chain” surge protectors.
• DO NOT use with any aquarium equipment.
• DO NOT use if correctly grounded outlets are not available.
• DO NOT install this device if there is not at least 30 feet (10 meters) or more of wire
between the electrical outlet and electrical service panel.
• DO NOT use in any circumstance that would affect the operation or reliability of life
support equipment, any medical applications, or patient care.
• This device features internal protection that will disconnect the surge protective
component at the end of its useful life, but will maintain power to the load – WHICH
WILL BE UNPROTECTED. If you don’t want your equipment at risk, follow the
manufacturer’s instructions for replacing the device.
Before using your new product, please read these instructions to prevent any damage
QUICK SETUP GUIDE
Desktop
Power Station
NS-PWSPPYR19
SOLUTION:
• Make sure that your power station is plugged into a working,
grounded AC outlet.
• Make sure that all power cords are connected correctly and make
sure that the power outlet is not switched (and turned off ).
Note:
Test the outlet with a working lamp. Try both top and bottom
outlets.
• Make sure that the power station switch and connected devices
are turned on.
PROBLEM:
Devices
connected to
your power
station do not
turn on.
ON/OFF control
AC outlets
AC outlets
AC outlets
USB outlets
LED indicator
Power cord
