background image

Using the shredder

Warning

: Always turn off the shredder when it is not in use.

Caution

: Do not insert more than 10 sheets of paper, one credit card, or one disc at a 

time. You may damage the shredder. 

To shred paper:

Insert paper into the paper or disc slot. When the paper has passed 
through, the shredder will stop.

Caution

: Always feed paper in as straight as possible to avoid paper jams.

To shred discs and credit cards:

Hold the disc or credit card by the edge and feed 
into the paper or disc slot one at a time, releasing 
when shredding begins. The shredder stops when 
the entire disc or credit card has been destroyed.

Caution

: Do not hold the disc with your finger through 

the center hole while feeding it into the shredder. 
Serious injury may occur. Never feed more than one disc 
or credit card at a time.

Notes

•  Never shred plastic (except credit cards, CDs, or DVDs), continuous forms, anything 

with adhesive including labels and envelopes, newsprint, or any hard materials.

•  While this shredder will shred staples and small paperclips, it is recommended that 

you remove them whenever possible to extend the life of your shredder.

LEDs

Setting up the shredder

1

  Place the shredder head securely on the rim of 

the supplied wastebasket.

 Caution

: Your shredder has very sharp, exposed 

blades on the underside. Use care when mounting the 
shredder to the wastebasket.

 

Note

: Do not use bags to line the wastebasket. 

2

  Connect the power cord to a power outlet.

3

  Slide the power switch from 

off 

to 

auto

.

auto

  The shredder starts automatically when an item is inserted into the paper or disc slot. 

When the item has passed through the slot, the shredder stops.

off

 

Turns off the shredder.

rev

 

Use the reverse setting to clear a paper jam or to pull out unshredded paper.

 

Caution

:  Never try to clear a jam by using REV when the wastebasket is full. This could make the jam 

worse.

Power

Overheat/Overload

Door Open

Lights green when the shredder is in use. Turns off when the shredder is in 
standy-by (power-saving) mode.

Lights red when the shredder is jammed or overheated, you have inserted 
more sheets of paper than recommended or the shredder has been used 
too long. 

Lights yellow if the wastebasket is opened or the shredder head is not 
mounted correctly.

Quick Setup Guide

Crosscut Paper Shredder  |  NS-PS10CC

Before using your new product, please read these instructions to prevent any damage.

Features

Power switch

Handle

Power switch

Paper or disc slot

Shredder head

Wastebasket

1

LEDs

NS-PS10CC_14-0476_QSG_V2_EN.ai   1   5/6/2014   3:16:05 PM

NS-PS10CC_14-0476_QSG_V2_EN.ai   1   5/6/2014   3:16:05 PM

Reviews: