www.insigniaproducts.com
8
STEP 4: Attaching the monitors
Depending on the VESA screw holes on the back of your monitors, you need to use the M4 × 12 mm mounting screws (
A
)
or the M5 × 12 mm mounting screws (
B
).
1
Determine which mounting screws you need (
A
or
B
) by hand-threading a screw into a VESA screw hole. Do not force
the screw to fit.
2
Lock the monitor plates into position with the 5 x 5 Allen wrench (
G
), then center the back of the first monitor on the
monitor plate at the end of the monitor support bar.
3
Align the mounting holes on the monitor with the holes on the monitor plate, then attach the monitor to the monitor
plate using four screws (
A
or
B
) with washers (
E
). Tighten the screws firmly with a Phillips screwdriver, but do not
overtighten. Repeat for the second monitor.
Note:
Monitors can be oriented either horizontally or vertically.
/
