37
Insignia NS-PDP42/50-09 Plasma TVs
www.insignia-products.com
PC mode problems
Specifications
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules.
Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within
the limits for a class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and
receiver.
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
•
Consult the dealer or an experienced technician for
help.
Problem
Solution
The signal is out
of range
• Adjust the resolution, horizontal
frequency, or vertical frequency.
• Check the input source.
Vertical bar or
stripe on the
background,
horizontal noise,
or incorrect
position
• Adjust the clock, phase, or
horizontal/vertical position, or try Auto
to configure these options.
The screen color
is unstable or a
single color
• Check the signal cable to make sure that
it is connected correctly.
• Reinstall your PC’s video card.
Dimensions
NS-PDP42-09
With stand
40.9 × 28.7 × 12.1 inches
(1040 × 729 × 3080 mm)
Without stand
40.9 × 26.6 × 3.2 inches
(1040 × 677 × 83.6 mm)
Dimensions
NS-PDP50-09
With stand
48.2 × 33.4 × 14.3 inches
(1224.7 × 849 × 364 mm)
Without stand
48.2 × 31.1 × 3.2 inches
(1224.7 × 790 × 83.6 mm)
Weight
NS-PDP42-09
With stand
Without stand
57.3 lbs. (26 kg)
52.9 lbs. (24 kg)
Weight
NS-PDP50-09
With stand
Without stand
91.4 lbs. (41.5 kg)
83.9 lbs. (38.1 kg)
Power
requirement
Input - NS-PDP42-09
Input - NS-PDP50-09
100-120V AC, 50/60 Hz
100-240V AC, 50/60 Hz
TV system
NTSC-M, ATSC 64 and 256 QAM
Program
coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69,
CADTV 1.135
External
antenna
impedance
75 ohms
Environment
Operating temp.
32~104°F (0~40°C)
Operating humidity
Less than 80%
Storage temp.
-4~140°F (-20~60°C)
Storage humidity
Less than 85%
Summary of Contents for NS-PDP42/50-09
