background image

PACKAGE CONTENTS

•  Dual Hard Drive Docking Station
• Power 

adapter 

(12V/3A)

•  USB 3.0 cable 

USB 3.0 Type B to USB 3.0 Type A

• 

Quick Setup Guide

Note: 

The 

USB 3.0 OUT

 port cannot be used to 

connect a computer.

SYSTEM REQUIREMENTS

• 

Windows OS:

  Windows® 10, Windows® 8.1, Windows® 8, 

Windows®7

• 

Linux Kernal:

  

Linux 2.4.1 and later versions

• 

Mac OS:

  Mac OS X 10.6 and later versions

FEATURES 

•  Fashionable design provides remarkable performance
•  Supports all 2.5" & 3.5" SATA I/II/III hard drives
•  Maximum capacity of each bay is up to 8 TB
•  Plug and play, no drivers needed
•  Supports SATA and USB 3.0 transfer speed up to 5 Gbps
•  LED indicator lets you check working status
•  Supports MTT (Multiple Transaction Translator)
•  Reads two discs (SSD and HDD) simultaneously.

 

Before using your new product, please read these instructions to prevent any damage.

HARD DRIVE DOCKING STATION

Hard Disk:

Insert an SSD or HDD into a slot on your docking 

station. You can use both slots at the same time.

 

CAUTION:

 To avoid damaging the equipment, 

make sure that the SSD/HDD is inserted in the 
correct direction.

Connect the USB cable to the 

USB 3.0

 

IN

 

jack on the 

docking station and to an available USB port on 
your computer.

Connect the power adapter to the 

DC IN

 jack on the 

back of your docking station, then turn on your 
docking station and the computer. The docking 
station LED blinks until the computer identifies your 
station, then the LED lights steady.

If this is the first time you are using an SSD or HDD, 

follow your computer's operating system 
instructions to format the disk.

Follow your computer's operating system 

instructions to transfer data to or from your 
computer. The docking station LED blinks while data 
is transferring.

When the transfer is complete, turn off power to the 

docking station by pressing the power switch. Press 
the eject button on the side of your docking station, 
then remove the SSD or HDD.

 

USB Devices:

 

 

You can use the 

USB 3.0 OUT 

port to connect USB 

devices. This jack provides two-way transmission 
between the USB device and an HDD, an SSD, or a 
computer.

QUICK SETUP GUIDE

Dual Hard Drive 
Docking Station 

NS-PCHDEDS19

Eject
Buttons

Front view

Back panel view

Power Switch

USB 3.0 OUT  USB 3.0 IN

Power adapter

 jack

Reviews: