9
6-Quart Multi-Cooker
www.insigniaproducts.com
Using your multi-cooker
Preparing to cook
1
Unplug the multi-cooker.
2
Open the cover by holding the cover handle with one hand, then
rotating the cover until the cover marking
aligns with the “Open”
mark
on the housing, then open the cover.
3
Check the float valve and exhaust valve for obstructions and confirm
that all parts are installed properly, especially the rubber gasket and
anti-block shield.
4
Remove the stainless steel inner pot, then remove any foreign objects
and water droplets from the outside of the inner pot and the inside of
the housing.
5
Add food and water to the inner pot. The total amount of food and
water should not exceed the MAX level indicated in the inner pot.
6
Put the inner pot into the electric multi-cooker housing, then rotate
the inner pot slightly left to right to ensure good contact between the
inner pot and heating plate.
7
Close the cover completely by holding the cover handle with one
hand and rotating the cover until the lock mark
aligns with the
“Close” mark
on the housing.
Max
NS-MC60SS8_17-0691_MAN_V1_ENG.fm Page 9 Tuesday, September 12, 2017 11:32 AM
