Quick Setup Guide
|
NS-MB2600W-C / NS-MB2600B-C
Mobile Battery Pack
PACKAGE CONTENTS
• Mobile Battery Pack
• Micro USB Charging Cable
•
Quick Setup Guide
CHARGING THE MOBILE BATTERY
Fully charge your mobile battery pack before using it for the first
time.
1
Plug the small end of the included USB cable into the battery
pack’s microUSB port (input).
2
Plug the large end of the USB cable (included) into a standard
USB port on your computer, vehicle charger, or wall charger
(not included).
The battery pack automatically begins charging.
CHARGING YOUR ELECTRONIC DEVICE
1
Plug the large end of the USB cable into the battery pack’s
USB port (output).
2
Plug the small end of the USB cable into your device.
The battery pack automatically begins charging your device.
Recharge the battery pack when the LED starts blinking.
Note:
If your device requires a different connector than the one
provided, use the cable that came with your device.
CHECKING YOUR BATTERY LEVEL
Press the battery indicator button to check your battery level:
• • • •
4 LEDs =
75-100%
power
• • •
•
3 LEDs =
50-75%
power
• •
• •
2 LEDs =
25-50%
power
•
• • •
1 LED =
0-25%
power
Blinking LED = <10% power
LEDs
Before using your new product,
please read these instructions to prevent any damage.
Micro USB (Input)
Battery Indicator Button
USB (Output)
NS-MB2600W-C_NS-MB2600B-C_14-0535_QSG_V1.ai 1 6/4/2014 10:59:27 AM
NS-MB2600W-C_NS-MB2600B-C_14-0535_QSG_V1.ai 1 6/4/2014 10:59:27 AM
