Insignia NS-LTDVD32-09, User Manual

Page: 11 / 116

11
Insignia NS-LTDVD32-09 32” LCD TV/DVD Combo
www.insignia-products.com
To connect a standard S-Video device to AV1
jacks:
1 Plug an S-Video cable (3) into the S-Video
out jack on an S-Video device (5) and into the
S-VIDEO1 jack (1) on the back of your TV.
2 Plug RCA audio cables (2) into the S-Video
device audio output jacks and into the
AUDIO
L and AUDIO R jacks on the back of your TV.
3 Turn on your TV.
4 Press INPUT and
/
to select S-Video1 .
To connect a standard S-Video device to AV2
jacks:
1 Plug an S-Video cable (9) into the S-Video
out jack on an S-Video device (5) and into the
S-VIDEO2 jack (6) on the side of your TV.
2 Plug RCA audio cables (7) into the S-Video
device audio output jacks and into the
AUDIO L and AUDIO R jacks on the side of
your TV.
3 Turn on your TV.
4 Press INPUT , then press
/
to select
S-Video2 .
Connecting a component video device
To connect a progressive-scan or HDTV
video source to Y/Pb/Pr jacks:
1 Plug a component video cable (2) into the
progressive-scan or HDTV video device (3)
and into the
Y/Pb/Pr jacks (1) on the back of
your TV.
2 Plug the RCA audio cables (4) into the audio
out jacks on progressive-scan or HDTV video
device and into the lower
AUDIO L and
AUDIO R jacks (1) on the back of your TV.
3 Turn on your TV.
4 Press INPUT , then press
/
to select
Component .
Connecting a digital audio input
You can connect your TV audio out to a digital
amplifier.
To connect to an amplifier equipped with a
digital audio input:
• Plug a coaxial cable (2) into the amplifier (3)
and into the
COAXIAL OUTPUT jack (1) on
the back of your TV.