10
Insignia NS-LCD47HD-09 47” LCD HD TV
www.insignia-products.com
Connecting a computer
To connect a computer using VGA:
1
Plug a VGA cable from your computer into
the VGA jack on the back of your TV.
2
Plug an audio cable from your computer’s
audio out jack into the AUDIO jack on the
back of your TV.
3
Plug in and turn on your TV.
4
Press the
INPUT
button repeatedly to select
the
VGA
input source.
Using your TV
Turning your TV on and off
To turn your TV on and off:
1
Make sure that the power cord is connected
to your TV and a power outlet.
2
Press the
button to turn on your TV. The
power indicator LED turns blue.
3
Press the
button again to return your TV
to standby. The power indicator LED turns
red.
Selecting the TV signal source
To select the TV signal source:
•
With the TV on, press the
INPUT
button on
either the TV or the remote to choose from:
•
ANT
(antenna)
•
TV
•
Composite rear
•
Composite side
•
S-Video rear
•
S-Video side
•
Component 1
•
Component 2
•
VGA
•
HDMI1
•
HDMI2
•
HDMI3
If you select
Video1
, press the
VIDEO
button
to choose between composite and S-Video.
Setting up the channel list
After you select your TV source, if you selected
antenna or cable you need to set up the channel
list. When you set up your channel list, your TV
searches for all available channels in your area
and stores a list of these channels. When you
press the
CH –
or
CH +
buttons, your TV skips
the channels that do not have a signal.
Automatically setting up channels
To automatically set up the channel list:
1
Press the
MENU
button. The Main on-screen
display menu opens with
Setup
highlighted.
2
Press to enter the sub-menu, then press
or
to
highlight
Auto Ch Search
.
3
Press
ENTER
or to start the search.
Manually adding or deleting channels from the
channel list
After you create a channel list using the Auto Ch
Search option, you can manually add or delete
channels from the channel list.
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
Many newer computers have HDMI output.
Note
When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
“wake” your computer, press the
POWER
button
on your TV or remote control.
VGA cable
Note
HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Note
You can press the
Exit
button to stop the search.
ENTER
